Windows Fix boot errors by displaying an Options screen

I want to express a thumbs up for the comments in the support group of iGuRu.gr which show your high level of knowledge and courtesy!

On the occasion of the problem that our friend had with the laptop and because I smelled a gentle "controversy", none of the proposed solutions is wrong, it is the set of steps followed in these cases, some of which will work as a solution .

So when we have problems booting Windows by viewing recovery options:

1) Memory hardware problems cause random reboots and are usually referred to as "XXXXXXXXXXXX address error" and cause a continuous reboot (Loop) when we are unlucky enough to experience such a hardware failure. So we will not have the recovery options screen available.

2) Problem memory can cause -after software installation- problematic disc entries that affect boot.

This is done if there are defective memory addresses that correspond to hardware for example in 2nd dimm which is not used to load the operating system but to install the software resulting in incorrect writing of its data to disk. (If this sounds strange to anyone, I will provide proof).

So: faulty memory can cause a loading error without reboots. And in this case, since we have the recovery options screen at our disposal, and we were to change the dimms with new ones, Windows would not load, since they themselves suggest software solutions: restore, reinstall, etc.

3) The disk with a hardware problem would definitely show error 0x00007b and if Windows starts a disk scan and finds evidence of problematic records, they start their deletions which usually solve the problem (logical-logical damaged sectors), if they don't solve it we are talking about physical ) bad sectors it tries to isolate and on the next reboot they will load Windows with προβληματικού δίσκου και προτροπή για αντίγραφα ασφαλείας και αντικατάσταση.

Αν καταστραφούν τομείς του δίσκου που περιέχουν κρίσιμα των windows, δεν θα φορτώσουν ποτέ και συνεπώς δεν θα δούμε ποτέ την οθόνη επιλογών αποκατάστασης.

Of course on SSDs things are simpler, or it will not work or we will have bad recordings.

Therefore, since we have the recovery options screen, Windows has already done a disk scan which did not resolve the issue.

4) What I have noticed is that Windows 10 has system reset disabled by default and has not reported the cause to any official ms doc. So the majority of those who try the reset solution do not have a positive result. I always activate it with a minimum use of at least 2% of the disk and always create a restore point before any work and it always works in 100% of cases (software problems) after the following:

5)"Bootrec / fixmbr, bootrec / fixboot" Where Windows could not load, it was the first move. One command resets the default domain from which Windows (mbr) starts. The second fixes the boot sector.

If they did not work for me, 99.9% of the cases it was a matter of material (disc). 0.01% was Linux :-P

If I was not given the command line startup option, I would load the Windows installation with recovery option from usb (or dvd) and find it from there.

If it wasn't loading , it launched the Windows check and I had access to the recovery options where a reset solved the problem.

End:

When our computer restarts without displaying any indications (eg installing updates, disk checking, etc.) and does not load the Desktop or does not display the recovery screen, then we press the On / off key until it turns off, we turn on the first appearance of the symbol of Windows we press the key again until it closes, we repeat the violent process until we see "windows check…" at the bottom of the screen.

This creates a boot error that forces Windows to start testing and repairing.

iGuRu.gr The Best Technology Site in Greecefgns

every publication, directly to your inbox

Join the 2.100 registrants.

Written by Lefteris

IEK Computer Applications, Networks and Office Automation Technician 2003

Leave a reply

Your email address is not published. Required fields are mentioned with *

Your message will not be published if:
1. Contains insulting, defamatory, racist, offensive or inappropriate comments.
2. Causes harm to minors.
3. It interferes with the privacy and individual and social rights of other users.
4. Advertises products or services or websites.
5. Contains personal information (address, phone, etc.).